logo
> 상품 > Railway Flat Wagon >
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon

Railway Flat Wagon 890mm

1000mm flatbed rail wagon

원래 장소:

중국

브랜드 이름:

Railteco

인증:

AAR

모델 번호:

코일운송차량

문의하기
조회를 요청하다
제품 상세정보
레일 표면에서 적재 표면까지의 높이(빈 휠 및 새 휠):
1103mm
레일 상단에서 커플러 중심선까지의 높이(빈 휠 및 새 휠):
890mm±15mm
고정 보기 휠베이스:
1727.2mm
휠 직경:
851mm
강조하다:

Steel Coil Railway Flat Wagon

,

Railway Flat Wagon 890mm

,

1000mm flatbed rail wagon

지불과 운송 용어
최소 주문 수량
1개
가격
Depends on products specifications
포장 세부 사항
Railteco 표준 수출 포장
배달 시간
3~6개월
지불 조건
신용장, 티/티
공급 능력
500개/년
관련 제품
문의하기
지금 접촉하세요
제품 설명
Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

 
Technical Specification

This technical specification applies to the bottom-door open-top wagons with an axle load of 25 tonnes and a track gauge of 1520 mm supplied to Uganda. Upon approval by the buyer, the present technical specification shall constitute an integral part of the supply contract.

This specification covers the general requirements, intended uses, key performance parameters, basic dimensions, primary structural design, coating and marking specifications, evaluation criteria, technical processes, vehicle testing, inspection and acceptance procedures, quality assurance, as well as other relevant aspects of the wagons.

Characteristics
  • The wagon mainly consists of car body, braking devices, coupler and draft gear devices, and bogies etc.
  • This wagon is used for transporting goods such as engineering machinery, mechanical equipment, containers, etc. that do not require rain and snow protection.
  • The braking system includes an air brake device and hand brake device.
  • It adopts CA-3 type coupler and matching hook tail frame, and adopts ST-90 type draft gear.
Main Performance Parameters
Load capacity 54t
Central Collection Load 40t
Tare weight 18t
Gross on rail road 72t
Axle load 18t
Minimum curve radius 74m
Operating speed 80 km/h
Wagon limit clearance Complies with the regulations of UR-G-LG-01
Basic Dimensions
Wagon length 13426mm
Underframe length 12500mm
Underframe width 2600mm
The distance between two bogie centers 9000mm
Maximum width of wagon 2760mm
Reference Photos
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon 0

직접적으로 당신의 조사를 우리에게 보내세요