logo
Casa > prodotti > Railway Flat Wagon >
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon

Railway Flat Wagon 890mm

1000mm flatbed rail wagon

Luogo di origine:

Cina

Marca:

Railteco

Certificazione:

AAR

Numero di modello:

Veicolo per il trasporto di bobine

Contattici
Richieda una citazione
Dettagli del prodotto
Altezza dalla superficie della rotaia alla superficie di carico (ruota vuota e nuova):
1103 mm
Altezza dalla parte superiore del binario alla linea centrale dell'accoppiatore (ruota vuota e n:
890 mm±15 mm
Passo fisso del carrello:
1727.2 mm
Diametro della ruota:
851 millimetri
Evidenziare:

Steel Coil Railway Flat Wagon

,

Railway Flat Wagon 890mm

,

1000mm flatbed rail wagon

Termini di trasporto & di pagamento
Quantità di ordine minimo
1 unità
Prezzo
Depends on products specifications
Imballaggi particolari
Imballaggio standard per l'esportazione Railteco
Tempi di consegna
3-6 mesi
Termini di pagamento
L/C, T/T
Capacità di alimentazione
500 unità/anno
Descrizione di prodotto
Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

 
Technical Specification

This technical specification applies to the bottom-door open-top wagons with an axle load of 25 tonnes and a track gauge of 1520 mm supplied to Uganda. Upon approval by the buyer, the present technical specification shall constitute an integral part of the supply contract.

This specification covers the general requirements, intended uses, key performance parameters, basic dimensions, primary structural design, coating and marking specifications, evaluation criteria, technical processes, vehicle testing, inspection and acceptance procedures, quality assurance, as well as other relevant aspects of the wagons.

Characteristics
  • The wagon mainly consists of car body, braking devices, coupler and draft gear devices, and bogies etc.
  • This wagon is used for transporting goods such as engineering machinery, mechanical equipment, containers, etc. that do not require rain and snow protection.
  • The braking system includes an air brake device and hand brake device.
  • It adopts CA-3 type coupler and matching hook tail frame, and adopts ST-90 type draft gear.
Main Performance Parameters
Load capacity 54t
Central Collection Load 40t
Tare weight 18t
Gross on rail road 72t
Axle load 18t
Minimum curve radius 74m
Operating speed 80 km/h
Wagon limit clearance Complies with the regulations of UR-G-LG-01
Basic Dimensions
Wagon length 13426mm
Underframe length 12500mm
Underframe width 2600mm
The distance between two bogie centers 9000mm
Maximum width of wagon 2760mm
Reference Photos
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon 0

Invii la vostra indagine direttamente noi