logo
Hogar > productos > Railway Flat Wagon >
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon

Steel Coil Railway Flat Wagon

Railway Flat Wagon 890mm

1000mm flatbed rail wagon

Lugar de origen:

Porcelana

Nombre de la marca:

Railteco

Certificación:

AAR

Número de modelo:

Vehículo de transporte de bobinas

Éntrenos en contacto con
Pida una cita
Detalles del producto
Altura desde la superficie del riel hasta la superficie de carga (rueda nueva y vacía):
1103 mm
Altura desde la parte superior del riel hasta la línea central del acoplador (rueda nueva y vacía):
890 mm ± 15 mm
Distancia entre ejes del bogie fijo:
1727.2 mm
Diámetro de la rueda:
851 mm
Resaltar:

Steel Coil Railway Flat Wagon

,

Railway Flat Wagon 890mm

,

1000mm flatbed rail wagon

Pago y términos de envío
Cantidad de orden mínima
1 unidad
Precio
Depends on products specifications
Detalles de empaquetado
Embalaje de exportación estándar Railteco
Tiempo de entrega
3-6 meses
Condiciones de pago
LC, T/T
Capacidad de la fuente
500 unidades/año
Descripción de producto
Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

Steel Coil Transport Vehicle With Axle Load Of 18t And Track Gauge Of 1000mm

 
Technical Specification

This technical specification applies to the bottom-door open-top wagons with an axle load of 25 tonnes and a track gauge of 1520 mm supplied to Uganda. Upon approval by the buyer, the present technical specification shall constitute an integral part of the supply contract.

This specification covers the general requirements, intended uses, key performance parameters, basic dimensions, primary structural design, coating and marking specifications, evaluation criteria, technical processes, vehicle testing, inspection and acceptance procedures, quality assurance, as well as other relevant aspects of the wagons.

Characteristics
  • The wagon mainly consists of car body, braking devices, coupler and draft gear devices, and bogies etc.
  • This wagon is used for transporting goods such as engineering machinery, mechanical equipment, containers, etc. that do not require rain and snow protection.
  • The braking system includes an air brake device and hand brake device.
  • It adopts CA-3 type coupler and matching hook tail frame, and adopts ST-90 type draft gear.
Main Performance Parameters
Load capacity 54t
Central Collection Load 40t
Tare weight 18t
Gross on rail road 72t
Axle load 18t
Minimum curve radius 74m
Operating speed 80 km/h
Wagon limit clearance Complies with the regulations of UR-G-LG-01
Basic Dimensions
Wagon length 13426mm
Underframe length 12500mm
Underframe width 2600mm
The distance between two bogie centers 9000mm
Maximum width of wagon 2760mm
Reference Photos
Steel Coil Railway Flat Wagon Transport Vehicle Track Gauge 1000mm Flatbed Rail Wagon 0

Envíenos su investigación directamente